CNPT-DEMO-KIT控制仪表 美国OMEGA进口CNPT-DEMO-KIT
CNPT-DEMO-KIT
温度 » 温度过程控制器和电源开关装置 » 1/8 DIN自动调谐控制器 » CNPT-Demo
PID控制器演示箱
PLATINUM Series PID Control Simulator
铂系列控制仿真
Up to 20 Samples per Second, 24-Bit ADC
每秒多达20个样品，24位ADC
32 Bit, 120 Mhz ARM Processor
32位，120兆赫的手臂处理器
USB, Serial and Ethernet Communication Ports
USB、串口和以太网通信端口
Peltier Thermoelectric Heater/Cooler Unit
Peltier热电加热/冷却设备
Front Panel Pushbutton Digital Input
前面板按键的数字输入
6V Indicator Lamp Alarm Indicator
6V指示灯报警指示
4 to 20 mA Input Remote Setpoint with Potentiometer Adjustment
4至20 mA输入远程设定电位器调整
Operates on 12 Vdc, 2 Amp—Non-Hazardous Power
工作在12伏，2安培无危险的力量
Current Limited Control Signals
限流控制信号
Pre-Wired
有线前
Intuitive “Smart” Menu Flow
直观的“智能”菜单流
Bright 3-Color LED Dual Display (RED, GREEN, and AMBER)
鲜艳的三色LED双显示（红、绿、琥珀）
Panel Mounted USB and Ethernet Connectivity
面板安装USB和以太网连接
Totally Firmware Configurable—No Jumpers to Set
完全固件配置没有设置
产品描述
The PLATINUM Demo & Training unit provides a PID control simulator that is fully integrated temperature control system suitable as a platform to investigate the use of closed loop (PID) and simple on/ off temperature control in both heating and cooling applications.
白金演示和培训单元提供了一个完整的集成温度控制系统，适合作为一个平台，调查使用的封闭回路和简单的开/关温度控制在加热和冷却的应用。
The demo unit includes a CN8DPT-144-C24-EIP-DC controller, powered by 12 Vdc, 2A universal AC to DC adaptor. It has a thermoelectric heating/ cooling element capable of 5 to 50°C setpoint and a Type K thermocouple for temperature readings. The unit comes with panel mounted USB and ethernet connectivity, an alarm indicator, a 4 to 20 mA remote set-point potentiometer, a pushbutton digital input, and an aluminum plate allowing the user to feel the temperature response.
演示单元包括cn8dpt-144-c24-eip-dc控制器，采用12伏供电，2A通用AC到DC适配器。它有一个热电加热/冷却能力5至50°C设定元件和K型热电偶的温度读数。该装置带有面板安装USB和以太网连接，报警指示，4至20 mA远程设定点电位器，一个按键的数字输入，和铝板允许用户感受到的温度响应。
A powerful 32-bit, 120 Mhz ARM processor provides an full PID control process with auto-tuning and a fuzzy logic based adaptive control algorithm that automatically adjusts and optimizes the control loop parameters based on external environmental or control system deviations.
一个强大的32位，120兆赫的手臂处理器提供了一个全自动调整控制过程和一个模糊逻辑的自适应控制算法，自动调整和优化的外部环境或控制系统偏差的基础上的控制回路参数。
A comprehensive set of alarm functions may be used to trigger output signals and/or modify the display colors for above, below, in-band and out-of-band conditions. Physical outputs may be assigned to Alarm, PID, ON-OFF control or auxiliary output functions.
一套完整的报警功能，可用于触发输出信号和/或修改上面的显示颜色，下面，在波段和带外条件。物理输出可能被分配给报警，控制，开关控制或辅助输出功能。
An advance multi-stage ramp and soak sequencer supports up to 99 profiles of 8 segment ramp/soak sequences. Profiles may be linked to provide extended sequences and auxiliary outputs may be triggered based on individual Ramp or Soak states to provide external control over blowers, mixers or other auxiliary control functions.
先进的多级斜坡和浸泡的音序器支持多达99个剖面的8段斜坡/浸泡序列。配置文件可能与提供扩展的序列和辅助输出可根据个人的斜坡或浸泡状态提供风机外部控制触发，搅拌机或其他辅助控制功能。
The CN8DPT features a large, 3-color (RED, GREEN, and AMBER) programmable LED display with the capability to change color and/or change the state of designated outputs when an alarm is triggered.
cn8dpt的一大特点，三色（红、绿、琥珀）可编程能力的LED显示颜色的改变和/或改变指定的输出状态，当触发报警。
An embedded ethernet connection allows the unit to connect directly to an ethernet network and transmit data in standard TCP/IP packets, or serve web pages over a LAN or the internet. The USB connection allows connecting the unit to the Windows based PLATINUM configurator software for configuration and monitoring as well as supporting USB based ‘thumb drives’ for directly transferring configuration data.
嵌入式以太网连接允许单元直接连接到以太网网络和标准的TCP/IP数据包传输数据，或为网页在局域网或互联网。USB接口可以连接单元的基于Windows的白金配置软件配置和监控以及支持基于USB拇指驱动器的配置数据的直接传输。
The PLATINUM Series family may be fully configured using an integrated 4 button keypad using a structured menu system, optimized to navigate to only those parameters applicable to the selected configuration. The PLATINUM configurator software may be connected thru the USB, serial or ethernet port to provide a Windows based PC application to provide a pointand- click configuration interface, performance charting and logging and the ability to load and save configuration files compatible to the PLATINUM USB file transfer protocol.
该白金系列家庭可以充分配置使用一个集成的4个按钮，使用一个结构化的菜单系统的键盘，优化导航到只有这些参数适用于选定的配置。白金配置软件可以连接到USB、串口或以太网端口提供一个基于Windows的PC应用程序提供了一个点，单击配置接口，性能图表和记录的加载和保存配置文件兼容的白金USB文件传输协议的能力。
规格
Display: 4-digit, 9-segment LED
Environmental Conditions: 0 to 50°C (32 to 122°F), 90% RH non-condensing
Max Power Consumption: 24 W (universal AC to 12 Vdc power adaptor included)
Input: Type K thermocouple
Resolution: 0.1° temperature
Temperature Stability, Thermocouple @ 25°C (77°F): 0.05°C/°C (cold junction compensation)
A/D Conversion: 24-bit sigma delta
Reading Rate: 20 samples per second
Digital Filter: Programmable from 0.05 seconds (filter = 1) to 6.4 seconds (filter = 128)
Setpoint Adjustment: -9999 to +9999 counts
Warm-Up to Rated Accuracy: 30 mins
Remote Setpoint: Connected to front panel potentiometer (4 to 20 mA)
Digital Input: Connected to front panel pushbutton
SPDT Relay: Connected to front panel indicator
DC Pulse1: Connected to PWM controlled Peltier driver (power to heater/cooler)
DC Pulse2: Connected to heat/cool Peltier control circuit (polarity control)
Activation Voltage: Provides power to 4 to 20 mA input and Indicator Light
COMMUNICATIONS
USB: Female micro-USB, host or device (VCD)
Ethernet: Standard RJ45, IEEE 802.3 10/100 Base-T auto-switching, TCP/iP, aRP, HTTPGET
Serial: RS232/RS485, 1200 to 115k baud
Protocols: Omega ASCII, MODBUS® ASCII/RTU PELTIER HEAT/COOL ELEMENT
Power: 12 Vdc @ 1.5 Amp (current limited)
Temperature Range: 5 to 50°C
Dimensions: 23 x 30 x 16.2 cm (9 x 11.8 x 6.3")
Weight: 2.05 kg (4.52 lb)
CNPT-DEMO PID Control Simulator - Platinum Series demonstrator
CNPT-DEMO-KIT PID Control Simulator - Platinum demonstrator with pelican case
CNPT-DEMO-KIT
CNPT-DEMO-KIT控制仪表 美国OMEGA进口CNPT-DEMO-KIT衍生阅读
CNPT-DEMO-KIT控制仪表 美国OMEGA进口CNPT-DEMO-KIT相关产品
