PHA-4美国OMEGA PHA-4上等渠道
PHA-4
控制器和记录仪系统 ? DPU91_pH
Multi-Parameter Input Transmitter For pH/ORP
DPU91_pH
Large Auto-Sensing Backlit Display
“Dial-Style” Digital Bar Graph
Intuitive and “User-Friendly” Interface
Optional Field Upgradable Relays
Warning LED Indicator
Custom 13-Character Label Capabilities
Factory Reset Capability
产品描述
The DPU91 transmitter provides a single channel interface for many different parameters including flow, pH/ORP, conductivity/resistivity, salinity and temperature. The DPU91-BC transmitter has the added capability of supporting the batch module for batching control. The extra-large (3.90 x 3.90") autosensing backlit display can be viewed at 4 to 5 times the distance over traditional transmitters. The highly illuminated display and large characters reduce the risk of misreading or misinterpreting the displayed values. The display shows separate lines for units, main and secondary measurements as well as a “dial-style” digital bar graph. The DPU91 is offered in both panel or field-mount versions. Both configurations can run on 12 to 32 Vdc power (24 Vdc nominal)and have 4 to 20 mA outputs. Designed for complete flexibility, plug-in modules allow the unit to easily adapt to meet changing customer needs. Optional modules include relay, direct conductivity/ resistivity, batch and a PC communications configuration tool. The unit can be used with default values for quick and easy programming or can be customized with labeling, adjustable minimum and maximum dial settings, and unit and decimal measurement choices.
Specifications General
Input Channels: 1
Input Types: Digital serial ASCII, TTL level, 9600 bps
Frequency Range: 0.5 to 1500 Hz
Accuracy: 0.5% of reading (display)
Measurement Types: Flow, pH/ORP, conductivity/resistivity, salinity, pressure, temperature or batch
Enclosure and Display
Case Material: PBT
Window: Shatter-resistant glass
Keypad: 4 buttons, injection-molded silicone rubber seal
Display: Backlit, 7 and 14-segment
Update Rate: 1 second
LCD Contrast: 5 settings
Indicators: “Dial-style” digital bar graph, LEDs for open collector, relays and warning indicator
Enclosure: ? DIN, NEMA 4X/IP65
Mounting Panel: ? DIN, ribbed on four sides for panel mounting clip inside panel, silicon gasket (included)
Field Mounts: Specified to Omega? field mount junction boxes
Weight: 0.63 kg (1.38 lb) DPU91-pH/ORP Series
Display Ranges
For flow version visit omega.com/dpu91_flow For conductivity/resistivity version visit omega.com/dpu91_conductivity
pH: 0.00 to 15.00
pH Temperature: -99 to 350°C (-146 to 662°F)
ORP: -1999 to 1999.9 mV
Temperature: -99 to 350°C (-146 to 662°F)
Environmental
Ambient Operating Temperature:
Backlit LCD: -10 to 70°C (14 to 158°F)
Storage Temperature: -15 to 70°C (5 to 158°F)
Relative Humidity: 0 to 100% condensing for field mount; 0 to 95% noncondensing for panel mount
Maximum Altitude: 4000 m (13,123')
Electrical Requirements
Power to Sensors:
Voltage: 4.9 to 5.5 Vdc @ 25°C, regulated short circuit protected
Terminal Blocks: Pluggable screw type 14 AWG maximum wire gauge
Input Power
DC: 10.8 to 35.2 Vdc, regulated
Current Output: 4 to 20 mA (10.8 to 35.2 VDC, 30 mA max)
DPU91 without Relay Module: 200 mA @ 10.8 to 35.2 Vdc
DPU91 with Relay Module: 300 mA @ 10.8 to 35.2 Vdc
Open Collector: 1
Overvoltage Protection: 48 V transient protection device current limiting for circuit protection and reverse-voltage protection
Relay Specifications (DPU91-R optional relay module)
Dry-Contact Relays: 2
Type: SPDT Form C
Maximum Current Rating: 5 A resistive 50 mA DC
Maximum Voltage Rating: 30 Vdc or 250 Vac
Hysteresis Adjustable: Absolute in engineering units (EUs)
Latch Reset: In test screen only
Delay: 9999.9 seconds (maximum)
Test Mode: Set on/off
Cycle Time: 99999 seconds (maximum)
Maximum Pulse Rate: 400 pulses/minute
Proportional Pulse: 400 pulses/minute
Volumetric Pulse Width: 0.1 to 3200 s
Pulse Width Modulation: 0.1 to 320 s
Input Types
Digital or AC Frequency: pH/ORP input via the digital output from the PHTX-2750 pH/ORP sensor electronics For flow models visit omega.com/ dpu91_flow
Raw Conductivity/Resistivity: Input directly from signet conductivity/ resistivity electrodes via direct conductivity/resistivity module or via CDTX-2850 For conductivity/resistivity models visit omega.com/dpu91_conductivity
Input Specifications
Digital Serial: ACSII, TTL level, 9600 bps
Frequency Input:
Sensitivity: 80 mV @ 5 Hz, gradually increasing with frequency
Span: 0.5 Hz to 1500 Hz @ TTL level input
Accuracy: ± 0.5% or reading maximum error @ 25°C (°77F)
Resolution: 1 μS
Repeatability: ±0.2% of reading
注: Comes complete with operator’s manual.
产品编号 产品描述
Multi-Parameter Display and Transmitter
DPU91 DC powered field mount multi-parameter display and transmitter (Requires FP90UM mounting kit)
DPU91P DC powered panel mount multi-parameter display and transmitter pH and
ORP Electrodes
ORE-2725 Flat surface ORP electrode, 10KΩ ID. 3?4 NPT
ORE-2725-ISO Flat surface ORP electrode, 10KΩ ID, ISO 7/1 R3?4
PHE-2724 Flat surface pH electrode, 3K Balco, 3?4 NPT thread
PHE-2724-ISO Flat surface pH electrode, ISO 7/1 R3?4 NPT
PHE-2726 Bulb style pH electrode, 3K Balco, 3?4 NPT thread
PHE-2726-ISO Bulb style pH electrode, 3K Balco, ISO 7/1 R3?4
PHE-2726-HF Bulb style, HF resistant pH electrode, 3K Balco, 3?4 NPT
PHE-2726-HF-ISO Bulb style, HF resistant pH electrode, 3K Balco, ISO 7/1 R3?4
PHE-2726-LC Bulb style, low conductivity pH electrode, 3K Balco, 3?4 NPT
PHE-2726-LC-ISO Bulb style, low conductivity pH electrode, 3K Balco, ISO 7/1 R3?4
Accessories
PHA-10 pH 10 buffer solutions 500 ml (1 pt)
PHA-10-GAL pH 10 buffer solutions 4L (1 gal)
PHA-4 pH 4 buffer solutions 500 ml (1 pt)
PHA-4-GAL pH 4 buffer solutions 4L (1 gal)
PHA-7 pH 7 buffer solutions 500 ml (1 pt)
PHA-7-GAL pH 7 buffer solutions 4L (1 gal)
PHA-DI De-ionized water 500 ml (1 pt)
PHA-DI-GAL De-ionized water 4L (1 gal)
PHAB-DI 20 single use foil packets of de-ionized water
PHAB-PH 5 each single use foil packets of pH-4, pH-7, pH-10 and de-ionized water
PHEH-275G Submersible sensor electronics, 3?4 NPT
PHEH-275G-ISO Submersible sensor electronics, ISO 7/1 R3?4
PHEH-275Y In-line sensor electronics, 15 ft cable, 3?4 NPT
PHEH-275Y-ISO In-line sensor electronics, 15 ft cable, ISO 7/1 R3?4
PHEH-276G In-line pre-amplifier, 3?4 NPT
PHEH-276G-ISO In-line pre-amplifier, ISO 7/1 R3?4
PHEH-276Y Submersible pre-amplifier, 3?4 NPT
PHEH-276Y-ISO Submersible pre-amplifier, ISO 7/1 R3?4
PHE-2700-DLA pH/ORP simulator and system tester
Mounting and Electrical Options
FP90UM Universal mounting bracket for remote mounted display
DPU90-R Field mount relay module
DPU90-COMM Field mount communications module
Mounting options for use with EasyCal
PHTX-275G Submersible pre-amplifier, pH/ORP/NPT EasyCal
PHTX-275Y Universal mount junction box with EasyCal
PHA-4
PHA-4美国OMEGA PHA-4上等渠道衍生阅读
PHA-4美国OMEGA PHA-4上等渠道相关产品
