D4132美国OMEGA D4132核心渠道商
D4132
OMEGABUS系列四通道传感器连接计算机接口模块
D5000 Series
1年保修 CE OmegaCare
OMEGABUS系列四通道传感器连接计算机接口模块
D5000 Series:OMEGABUS系列四通道传感器连接计算机接口模块
d5111
四通道的模拟输入
完整的传感器，RS-485或RS-232C接口
ASCII格式的命令/响应协议
500 V RMS的模拟输入隔离
15位的测量分辨率
连续自标定；没有任何的调整
可编程的数字滤波器
10伏至30伏直流电需要非稳压电源
RS-485通信线的瞬态抑制
螺丝端子插头连接器提供
四通道的传感器到计算机模块D5000）解决方案是完整的家庭设计的数据采集系统基于个人计算机和其他设备的处理器为基础的具有标准串行I／O端口。该模块的模拟输入信号转换为工程单位4和发送ASCII码格式的主机中的任何与标准的RS - 485或RS - 232C端口。这些模块可以测量温度，电压和电流。该模块可直接连接到传感器和执行的全宽的品种；信号调理、转换、线性化和工程单位。
该交换机模块是包含在罐或盘。的功能，如地址、波特率、奇偶校验、回声等。可选择的命令是使用简单的通信port–without要求访问的模块。在非易失性存储在EEPROM的选择，即使在电源的维护数据的情况。
*关键的是，模块系列D5000是容易使用的。你不需要经历复杂的工程中数据采集硬件。D5000系列模块与个人电脑，家庭人与CAN总线的数据采集系统的构建。这种模块化的方法，数据采集是非常灵活的，易于使用的和成本有效的。该模块可以混合和匹配到你的应用程序安装。他们可以被放置在从远程主机和从对方。你可以到一个字符串线30集在线模块通过RS-485与repeaters。
所有的组件是提供与终端连接器和插头的螺钉被安装硬件。该连接器允许系统扩展，或没有disturbing场reconfiguration修复线路。
操作原理：
D5000 modules are complete four-channel data acquisition systems. Each unit contains analog signal conditioning circuits optimized for a specific input type. The amplified sensor signals are converted to digital data with a microprocessor-controlled integrating A/D converter. Offset and gain errors in the analog circuitry are continuously monitored and corrected using microprocessor techniques. The D5000 converts the digital signal data into engineering units using look-up tables. The resultant data is stored in ASCII format in a memory buffer. The modules continuously convert data at the rate of 8 conversions per second and store the latest result in the buffer.
The host computer may request data by sending simple ASCII commands to the module.
DIGITAL FILTER
The D5000 options include a unique programmable single pole digital filter. The filter is used to smooth analog data in noisy environments. Separate time constants may be specified for small and large signal changes. Typically, a large time constant is specified for small signal changes to filter out noise and provide stable output readings. A smaller time constant may be chosen for large signal changes to provide fast response to such changes.
COMMUNICATIONS
The D5000 are designed to be easy to interface to all popular computers and terminals. All communications to and from the module are performed with printable ASCII The D5000 will instantly respond by communicating the ASCII buffer data back to the host.
USER OPTIONS
The D5000 offers a variety of userselectable options including choice of address, baud rate, parity, echo, etc. All options are selectable using simple commands over the communications port. All options are stored in a nonvolatile EEPROM which maintains data even after power is removed.
COMMUNICATIONS The D5000 are designed to be easy to interface to all popular computers and terminals. All communications to and from the module are performed with printable ASCII characters. This allows the information to be processed with string functions common to most high-level languages such as BASIC. For computers that support standard ports such as RS-232C, no special machine language software drivers are necessary for operation.
RS-232C is not designed to be used as a multiparty system; however, the module can be daisychained to allow many modules to be connected to a single communications port. In this network, any characters transmitted by the host are received by each module in the chain and passed on to the next module until the information is echoed back to the host. If a module is correctly addressed and receives a valid command, it transmits a response on the daisy chain network. The response will be rippled through any other modules in the chain until it reaches the host. RS-485 was developed for multidropped systems that can communicate at high data rates over long distances. For systems requiring many modules, high speed or long distances, RS-485 is recommended.
|
To Order (Specify Model Number)
|
RS-232C Output
Model Number
|
RS-485 Output
Model Number
|
Input
|
|
D5111
|
D5112
|
100 mV
|
|
D5121
|
D5122
|
1 V
|
|
D5131
|
D5132
|
5 V
|
|
D5141
|
D5142
|
10 V
|
|
D5151
|
D5152
|
100 V
|
|
D5251
|
D5252
|
4-20 mA
|
|
D5311
|
D5312
|
J (Iron-Constantan)
|
|
D5321
|
D5322
|
K (Chromel-Alumel)
|
|
D5331
|
D5332
|
T (Copper-Constantan)
|
|
D5341
|
D5342
|
E (Chromel-Constantan)
|
|
D5451
|
D5452
|
2252 Ohm Thermistor
|
产品型号 产品描述
Voltage Input Modules
D5111 100 mV input, RS-232C output
D5112 100 mV input, RS-485 output
D5121 1 V input, RS-232C output
D5122 1 V input, RS-485 output
D5131 5 V input, RS-232C output
D5132 5 V input, RS-485 output
D5141 10 V input, RS-232C output
D5142 10 V input, RS-485 output
D5151 100 V input, RS-232C output
D5152 100 V input, RS-485 output
Current Input Modules
D5251 4 to 20 mA input, RS-232C output
D5252 4 to 20 mA input, RS-485 output
Thermocouple Input Modules
D5311 Type J thermocouple input, RS-232C output
D5312 Type J thermocouple input, RS-485 output
D5321 Type K thermocouple input, RS-232C output
D5322 Type K thermocouple input, RS-485 output
D5331 TypeT thermocouple input, RS-232C output
D5332 TypeT thermocouple input, RS-485 output
D5341 Type E thermocouple input, RS-232C output
D5342 Type E thermocouple input, RS-485 output
Thermistor Input Modules
D5451 2252 ohm thermistor input, RS-232C output
D5452 2252 ohm thermistor input, RS-485 output
Accessories
A1000 RS-232 to RS-485 Converter, 115 Vac power
A1000-230 RS-232 to RS-485 Converter, 230 Vac power
A2000 RS-232 to RS-485 Converter, 10-30 Vdc power
A1000-CABLE 5 ft. cable, male to female
D4132
D4132美国OMEGA D4132核心渠道商衍生阅读
D4132美国OMEGA D4132核心渠道商相关产品
