CN142-R1-DC2-C4美国OMEGA CN142-R1-DC2-C4
CN142-R1-DC2-C4
温度过程控制器 ? 1/32和1/16 DIN自动调谐控制器 ? CN142 Series
Universal Temperature Process Controller
CN142 Series
Dual Display
J, K, R, S Thermocouple Inputs
Process Inputs
RTD and Thermistor Inputs
3 Outputs
Alarm, Event and Timer Functions
On/Off or PID Control
3 Step Ramp Soak Feature
Autotune
Digital Input
Password Protection
24 to 230 Vac/Vdc
Optional RS485
Optional Software with Configuration Module
产品描述
Monitor and control temperature or process applications with precision using the CN142 Series controllers. The CN142 Series provides dual LED displays for local indication of process value and setpoint value. Control methods include on/off, PID, auto-tune and manual-tune. Controller includes a 3 setpoint ramp/soak control feature, and also includes alarm, event and timer functions with optional RS485 communications. An optional software package CN-SW-HW-KIT includes cable and configuration module for quick configuration of units, as well as copying configuration parameters from one unit to another. The configuration module can also be purchased separately and with a built-in battery feature, configuration settings can be downloaded and copied to the module without power applied to controller. The module can then be plugged into a new unit without power applied and the configuration setting can be transferred for easy set-up for multiple units.
Specifications
Front Bezel: 32 x 74 mm (1.6 x 2.9")
Panel Depth: 53 mm (2.1")
Supply Voltage: 24 to 230 Vac/Vdc ±15%, 50/60 Hz
Power Consumption: 2 W
Display: Two 4-digit, 10 mm (0.4") green (SV), 8 mm (0.3") red (PV)
Accuracy: ±0.5°C temperature, 0.2% reading
Resolution: 1°/0.1° 10 μV process
A/D Conversion: Sigma-delta
Reading Rate: Programmable
Digital Filter: Programmable
Operating Conditions:
Temperature: 0 to 45°C (32 to 113°F)
Humidity: 35 to 95 RH%
Material:
Enclosure: Noryl UL94V1 self-extinguishing
Front Panel: PC ABS UL94V0 self-extinguishing
Weight: 112 g (3.95 oz)
Front Panel: IP65 (with gasket), box IP30, terminal blocks IP20
Inputs:
Thermocouple: J, K, R, S
RTD: Pt100, Pt500, Pt1000, Ni100
Thermistor: PTC1K, NTC10K (B 3435K), NTC 2252 O
Process: 4 to 20 mA, 0 to 10V, 0 to 40 mV, potentiometer 0 to 6/160 KO
Sampling Time: 4,1 ms (frequency 242 Hz)
1 Digital Input: ? setpoint selection, hold, run (only for thermocouple, 0 to 10V, 0/4 to 20 mA, 0 to 40 mV)
Outputs:
2 Relays: 8 A to 250 Vac and 5 A to 250 Vac
DC Pulse: 12 Vdc, 30 mA
Serial Communication: RS485 Modbus ? RTU, master/slave
Control Algorithms: On/off with hysteresis, P, PI, PID, PD, time proportional
Tuning: Manual or autotune
Data Protection: Lock of command/ alarm setpoint; access to parameters by password
Alarm Modes: Absolute/threshold, band, high/low deviation; alarm with optional manual reset
Soft-Start: Rising gradient expressed as °C or °F/hour
Programmer Function: Start/stop, 3 steps pre-programmed cycle
Timer Function: Controller function + single/double timer
产品编号 产品描述
CN142-R1-R2-DC3 Controller, 3 outputs, Relay, Relay, dc Pulse
CN142-R1-DC2-C4 Controller, 2 outputs, Relay, dc Pulse, RS485
Accessories
CN-SW-HW-KIT Software, cable and configuration module kit
CN-CONFIG-MODULE Configuration memory plug in module
CNQUENCHARC Noise suppresion kit, 100 to 230 Vac
CN142-R1-DC2-C4
CN142-R1-DC2-C4美国OMEGA CN142-R1-DC2-C4衍生阅读
CN142-R1-DC2-C4美国OMEGA CN142-R1-DC2-C4相关产品
