OM-SQ2040-4F16数据采集器 美国omega衍生阅读:0-5V、1-5V 线性电流：0-10mA、4-20mA 输出规格： 4-20mA电流输出（*大负载650Ω） 两路继电器输出 一路变送输出 DC12V/DC24V馈电 打印/通讯接口/USB接口 记录时间： 四笔记录：72小时/笔(记录间隔1秒) 四笔记录：360天/笔(记录间隔4分钟) 断电保护时间： 用FLASH MEMORY保存设置参数和 历史数据，断电后长久保存，采用硬 件时钟，掉电后也能准确运行。 环境温度： 0-50℃ 环境湿度： 0-85%RH 型号说明编辑 新功能:USB接口：插U盘备份历史数据和报警信息，接打印机打印历史曲线和数据；可通过U盘备份历史数据，再到PC上用软件进行历史数据查看与分析 温度记录仪特点 1、设计新颖，能满足各种记录需求 2、操作简单，性能可靠。 3、能以图表、曲线、报表等形式输出数据,进行数据的分析统计，并能将数据通过电子邮件传输。 4、可多次重复使用。 便携式单温度数据记录仪是专门设计用于超低功耗，超长时间温度数据记录的数据记录仪系列产
OM-SQ2040-4F16数据采集器 美国omega
16或32个通用输入加2的高电压的便携式数据记录器，4脉冲和8 digitalevent /状态输入
OM-SQ2040-2F16
1年保修 CE OmegaCare
OM-SQ2040-2F16 ：16或32个通用输入加2高的便携式数据记录器
电压，4脉冲和8 digitalevent /状态输入
om-sq2040-2f16
16真正的差分或32个单端电压通用模拟输入，电流或电阻测量高电压脉冲加2，4和8的数字事件/状态输入
模拟输入可用于热敏电阻，热电偶，2，3或4线RTD温度传感器和4至20 mA信号
用户可选择测井高达100赫兹的速率高达4通道
内部数据移动MMC/SD下载（多媒体卡或**数字记忆）
大型非挥发性内存的数据保留几乎是无限的
以太网，Wi-Fi（在om-sq2040-2f16-wifi和om-sq2040-4f16-wifi）USB和RS-232通信端口
以太网，USB和RS-232通信端口
使用外部设备的传感器和报警输出功率场效应晶体管
方便使用2线信息，20字符液晶显示和按键面板
利用先进的数学函数，导出计算通道的通道
The OM-SQ2040 Series combines a higher channel count with the same high performance, comprehensive features and universal inputs as the OM-SQ2020 in a neat compact and portable instrument. Using multiple 24-bit analog to digital convertors, twin processors and removable memory options provide great flexibility to handle a wide range of complex and demanding multichannel applications.
The OM-SQ2040 series are the ideal data loggers for industrial, scientific research and quality assurance applications. The OM-SQ2040 provides standalone data acquisition, advanced networked solutions and data analysis straight out-of-the-box.
Input Connections:
The OM-SQ2040-2F16 data logger has two analog to digital converters (A/D’s) which increases logging flexibility over the OM-2020-1F8 model. The first corresponds to inputs on blocks A, B, C and D and the second corresponds to inputs on blocks G, H, J and K. Each connection block will accept up to 2 differential inputs or up to 4 single-ended inputs (it is not possible to mix single ended and differential inputs on a block). The OM-SQ2040-4F16 data logger has four analog to digital converters (A/D’s) which increases logging flexibility over the other OM-SQ2020 and OM-SQ2040 models. The first corresponds to inputs on blocks A and B, the second corresponds to inputs on blocks C and D, the third corresponds to inputs on blocks G and H and the fourth corresponds to inputs on blocks J and K. Each connection block will accept up to 2 differential inputs or up to 4 single— ended inputs (it is not possible to mix single-ended and differential inputs on a block).
Concurrent Sampling:
The OM-SQ2040 series uses |multiple analog to digital converters that enables true concurrent sampling and logging. This allows the user to configure up to 4 channels to log at a rate of 100 Hz while retaining different sample speeds on other channels. This makes the OM-SQ2040 ideal for measuring dynamic parameters that change at different rates such as temperature and pressure.
Communications:
Ethernet, Wi-Fi (on the OM-SQ2040-2F16-WIFI and OM-SQ2040-4F16-WIFI) USB and RS-232 serial ports are built-in. This allows quick connection to either a PC based TCP/IP network, a wireless to PC connection or to a modem for remote data downloading. This flexibility enables global data access and retrieval as well as complete system integration of the OM-SQ2040 series into complex and critical applications.
Multiple Configurations Stored in the Logger:
Up to six logger configurations (channel type, names, logging speeds, triggers, etc.), together with the current configuration, can be held in the logger’s internal memory. Additional configuration settings can also be loaded from the external MMC/SD memory card. This allows the operator to quickly and easily switch between logger configurations without the need for a PC.
Comprehensive Software Configuration
The OM-SQ-SOFT software (supplied with the OM-SQ2040 series data loggers) allows logger configuration, data download and data export while giving the user full control over the OM-SQ2040. The optional OM-SQ-SOFT-PLUS software gives the user access to many advanced data analysis and data archiving/transfer features. The optional OM-SQ-SOFT-PLUS software lets you quickly and easily analyze the data from your OM-SQ2040 data logger in a familiar Explorer style interface. Data can be displayed with 2 different auto scaling Y-axis. This is particularly useful when displaying widely varying data from different sensors on one graph. You can also zoom in on areas of interest, use a cursor to pick out exact values, times and dates, get astatistical summary of your data, set high and low alarm thresholds and, using the calculation function, you can create new virtual channels from existing channels.
The OM-SQ-SOFT-PLUS software also incorporates a report generation facility, which allows you to create custom report templates consisting of a title page with descriptive text, headers and footers, graphs, tabular list of data, statistics and data logger setup information. Templates can be setup with any of these combinations and saves time when preparing similar presentations of data.
规格：
ANALOG INPUTS
Accuracy: See table on PDF
Common Mode Rejection: 100 dB
Input Impedance: >1Mù
Linearity: 0.015%
Series Mode Line Rejection: 50/60 Hz 100 dB
Analog Input Connections: Detachable screw terminal blocks
ANALOG - DIGITAL CONVERSION
Type: Sigma-Delta
Resolution: 24-bit
Sampling Rate: Up to 10, 20* or 100* readings per second per ADC. * With mains rejection off
ALARM OUTPUTS
4 x open drain FET (18 V 0.1 A)
Digital I/O Connections: DB25F connector
CALCULATED CHANNELS
Up to 16 virtual channels derived from physical input channels
RESOLUTION
Up to 6 significant digits
PROGRAMMING/LOGGER SETUP
OM-SQ-SOFT or OM-SQ-SOFT-PLUS software; software compatible with WIN XP/VISTA
(32-bit & 64-bit)/7 (32-bit & 64-bit)
COMMUNICATION
Standard: RS-232 (automatic baud rate selection to 115200 baud) Ethernet 10/100 base TCP/IP USB 1.1 and 2.0 compatible
Wireless Ethernet: (Wi-Fi); 802.11b, 2.4GHz, 1 to 14 channels Security: Open, WEP (64 or 128bi encryption), WPA or PA2/802.11i Network: Infrastructure only with specified SSID (external power pack required for Wi-Fi connection)
External Options: GSM, WIFI and PSTN Modems
POWER SUPPLY
Internal: 6 "AA" alkaline batteries (included)
External: 10 to 18 Vdc reverse polarity and over-voltage protected
POWER CONSUMPTION @ 9V
Sleep Mode: 600 μA Logging: 40 to 130 mA
DISPLAY AND KEYPAD
2 line x 20 character LCD display; battery state and external power indicator; keypad lock
Navigate To: Arm/disarm/pause/ continue; meter any channel or alarm; select from up to 6 x pre-stored setups; status/diagnostics/memory/ time and date; download to MMC/SD
OPERATING ENVIRONMENT
Temperature: -30 to 65°C (-22 to 149°F)
Humidity: 90% at 40°C non-condensing
GENERAL
Power Output for External Device:
Regulated 5 Vdc at 50 mA or logger supply voltage at 100 mA
Time and Date: Built-in clock in 3 formats
Scaling Data: Displays readings in preferred engineering units
Internal Memory: 16 MB (Up to 1,800,000 readings)
External Memory: Up to 1 GB - removable MMC/SD
(for transferring internal memory and storing setups only)
Dimensions: 175 H x 235 W x 95 mm D (6.9 x 9.3 x 3.7")
Weight: Approx. 1.2 kg (2.6 lb)
Enclosure Material: ABS
Memory Modes (Internal Only): Stop when full or overwrite
产品型号 产品描述
OM-SQ2040-2F16 Portable data logger with 2 fast channels
OM-SQ2040-4F16 Portable data logger with 4 fast channels
OM-SQ2040-2F16-WIFI Portable data logger with 2 fast channels and integrated Wi-Fi networking
OM-SQ2040-4F16-WIFI Portable data logger with 4 fast channels and integrated Wi-Fi networking
OM-SQ-NET-ADAP Serial/ethernet converter kit
OM-SQ-GSM-KIT GSM modem kit
OM-SQ-RF-ADAP Wireless network adaptor
OM-SQ-UNIV-ADAP Universal power pack
OM-SQ-UNIV-ADAP-1 Universal power pack with 1 m (3.2') flying lead
OM-SQ-CS Spare current shunts (package of 4)
OM-SQ-SER-CABLE OM-SQ data logger to PC serial port cable
OM-SQ-USB-CABLE Spare OM-SQ data logger to PC USB port cable
OM-SQ-TB3 Spare 3-way terminal block with cable restraint
OM-SQ-TB4 Spare 4-way terminal block with cable restraint
OM-SQ-TB6 Spare 6-way terminal block with cable restraint
OM-SQ-SOFT-PLUS OM-SQ2040 plus software
OM-SQ-SOFT-PLUS-LIC OM-SQ2040 plus software multi-user license
OM-SQ2040-4F16数据采集器 美国omega
OM-SQ2040-4F16数据采集器 美国omega衍生阅读:调节大棚或育苗室等环境中的温湿度。用电子温湿度记录仪简化你的工作，节约成本，并不受过多的人为因素的干扰，真实得反映记录过程。 在运输业的应用 在长途或远洋运输过程中，货仓中的温湿度过高或过低会直接或间接影响所运货物的品质，特别是运送冷冻冷藏食品时尤为重要。承运方与托运方往往因为运输货物品质变化等问题难以为出哪方的责任产生争议。预防这种争议，只要运输前在货仓中放入电子温湿度记录仪并开启记录，在货物到达目的地后读取运输期间货仓的温湿度值，PC软件自动生成JPG、TXT、Excel三种图文表格形式，结果一目了然，当然也就责任明确。电子温湿度记录仪简化你的工作，并且不受过多的人为因素的干扰，客观真实得反映记录过程。一定程度上，也是解决这方面争议的有力证据。 在食品储运行业的应用 在食品加工储运过程中，及时掌握食物所处的环境情况是否有处在食品**条件下是非常重要的。而在环境中，温度与湿度的超标能直接导致食物变质。如
OM-SQ2040-4F16数据采集器 美国omega 相关产品
